Windows and doors · Montréal · Est. 2025
High-performance windows and doors,
certified for Canada.
- 10 to 20-year warranty
- Supplied and installed by Cadence
- 10 to 14-week lead time
Three lines of windows and doors, Hybrid, Alu, and Passive, CSA certified, ENERGY STAR-ready depending on configuration, and compliant with Canadian and Québec standards. Available as a supply-and-install package or supply-only, across Canada, with a typical lead time of 10 to 14 weeks.
- CSA certified
- Energy Star
- Passive House Institute
- Tilt & Turn
- Fixed Light
- Side-Hinged Door
- Thermally Broken Aluminum
- Low-E Argon Triple Glazing
- Warm-Edge Spacer
- EPDM Weather Seals
- German Roto Hardware
- AkzoNobel powder-coat paint · AAMA
- CSA A440 Certified
- Passive House Certified Component
- 10 to 20-Year Warranty
- Tilt & Turn
- Fixed Light
- Side-Hinged Door
- Thermally Broken Aluminum
- Low-E Argon Triple Glazing
- Warm-Edge Spacer
- EPDM Weather Seals
- German Roto Hardware
- AkzoNobel powder-coat paint · AAMA
- CSA A440 Certified
- Passive House Certified Component
- 10 to 20-Year Warranty
Cadence Alu 93,
our best value profile.
The thermal-break Alu 93 profile lets through less than half the heat the NBC 2020 allows, and its CW-PG70 class qualifies it for mid- and high-rise buildings, condos and offices, where wind loads increase with height.
- U-factor
- 0.85 W/m²·K, thermal-break Alu 93 profile. That's 54% below the NBC 2020 ceiling of 1.84 W/m²·K (verified to CSA A440.2:19).
- Warranty
- 20 yr Twenty years on sealed glass units and welded aluminium frames; ten years on hardware, EPDM seals, and finish, warranties managed by Cadence.
- Energy Rating
- 40 Alu and Hybrid fixed units reach an Energy Rating of 40 per CSA A440.2:19, the highest in the collection.
- Structural class
- CW-PG70 Top NAFS class on our composite assemblies (up to CW-PG80 on certain stand-alone fixed windows), for mid- and high-rise buildings.
Three lines.
One certified envelope.
Three certified lines, Hybrid (75 mm profile, UPVC core and aluminium cladding on the exterior), Alu (75 and 90 mm thermal-break for windows, 93 mm passive thermal-break for windows and side-hinged doors, 142 mm for sliding patio doors), Passive (130 mm profile, Passive House certified). Every Cadence window and door is CSA certified to the same North American standard.
Line 01, Hybrid
Cadence Hybrid.
UPVC core, aluminium cladding on the exterior. CSA-certified envelope, 75 mm profile, the everyday performer for residential and multi-unit projects.
Line 02, Alu
Cadence Alu.
An all-aluminium thermal-break system. The 75 and 90 mm profiles are available for windows; the 93 mm, flagship profile, adds a reinforced-polyamide passive thermal break and covers both windows and side-hinged doors of the same type, down to U 0.85 W/m²·K; the 142 mm serves sliding patio doors. Slim sightlines, large sizes, certified performance.
Line 03, Passive
Cadence Passive.
Passive House Institute certified. U-factor down to 0.75, a 130 mm glue-laminated timber frame, triple glazing, passive-house grade.
Proven precision,
on every Cadence frame.
Every Cadence frame assembles components backed by test reports: Roto multi-point hardware, Technoform warm-edge spacer, AkzoNobel powder-coat paint (AAMA-compliant), and CSG sealed glass from an IGCC-certified plant.
-
Roto
Germany
Tilt & turn, side-hinged
-
HOPPE
Germany
Handles, available for Alu 75 and 93 lines
-
Technoform
Germany
Warm-edge spacer
-
AkzoNobel
Netherlands
Powder-coat paint, AAMA (2603/2604/2605)
-
CSG
Certified IGU supplier
SGCC / IGCC / IGMA glass
Warrantied products,
sealed for Canadian winters.
-
10- to 20-year warranties
Sealed glass units and welded aluminium frames are warrantied 20 years; German hardware, EPDM seals, and AkzoNobel powder-coat paint (AAMA-compliant), 10 years. A higher grade (AAMA 2604 or 2605, per project) extends paint coverage to 20 years. Every warranty is managed by Cadence.
-
German Roto hardware
Multi-point locking Roto hardware on every operable sash, factory-fitted and warrantied with the frame. Smooth tilt & turn action, tight compression, and serious security.
-
EPDM weather seals
Dual EPDM rubber gaskets seal each frame against air and water. Unlike foam, EPDM stays flexible for decades, no hardening, shrinking, or cracking through Canadian winters.
Supplied, installed
and warrantied by one team
Cadence supplies premium windows and doors, in three certified lines: Hybrid, Alu, and Passive. Every unit is CSA certified; the Passive line additionally holds a Passive House Institute certificate. Fitted with German precision hardware and delivered turnkey (supply and installation) at a highly competitive price.
We recommend the range, produce the shop drawings, supply, deliver, and install: a single point of contact, from specification to after-sales service, warrantied by Cadence.
Seven steps,
one team accountable.
-
01
Specification.
We recommend the line based on your drawings, the climate zone, and the envelope budget, with the target U-factor and the CSA verification.
-
02
Quotation.
You send us your request; we price the units and issue a detailed quotation, at no cost or obligation.
-
03
Drawings.
Our technical team reviews the jamb, sill, and head details, then issues shop drawings for approval.
-
04
Production.
Frames are manufactured to the approved purchase order, with a full inspection before shipping.
-
05
Delivery.
Units are delivered to site on the agreed schedule, ready to install.
-
06
Installation.
Our crews install on site: perimeter sealant, sills, insect screens, and opening limiters.
-
07
Warranties and after-sales service.
Cadence consolidates the various manufacturers' warranties (10 to 20 years) and handles after-sales service, as a single point of contact.
Consultation · By appointment